The vertical metal recycling baler is suitable for the recycling of many different materials such as old materials, waste paper, and plastics. This machine is good equipment to improve labor efficiency, reduce labor intensity, save manpower and reduce transportation costs. The extruded material is reduced in size, which is convenient for transportation and storage.
The usage of a vertical metal recycling baler
The vertical metal recycling baler is suitable for beating waste paper, waste plastic, plastic bottles, cans and foam, and other waste materials. In addition to hard materials, the machine can also bale oranges, used cartons, straws, etc. It is also widely used in agriculture and animal husbandry.
Maintenance of the scrap metal press machine
- Turn off the main power after work every day.
- Clean up foreign objects around the vertical metal recycling baler; clean up foreign objects inside the machine.
- Activity position plus appropriate lubricant to reduce machine wear.
- Regularly check whether the screws in various parts of the scrap metal press machine are loose, the new machine is easy to loosen the part of the small flange screws in the shaft. And four 5/8 screws in the pressure plate, to regularly reinforce.
Notes on scrap metal baler press machine
- Before you start packing first check whether the doors are closed, and whether the door locking heart is buckled in place. The knife and shear buckle are buckled on. Whether the safety chain is fastened to the handle. If any part of the above is not well buckled do not pack to avoid accidents.
- In the scrap metal baler press machine operation. People standing next to the machine, heads, hands, and body parts do not reach into the door, so as not to pressure injury.
